1. First you will have to get two 2x2 with wheel edges on two opposite sides. Put these two
pieces side by side (picture 1).
2. Put a 2x4 piece on top of the two 2x2 (pictures 2 & 3).
3. Put a 2x2 piece in the middle on top of the 2x4 (pictures 4 & 5).
4. Put a 2x1 piece with the bar in the front, on top of the 2x2 (pictures 6 & 7)
5. On top of the piece you have right now, snap a bent arm in the middle of the 2x2
(pictures 8 & 9)
6. Pop the black camera onto the arm - use your common sense to find where to put it -
(pictures 10 & 11)
7. Snap the second strait arm on the other side of the bar (pictures 12 & 13)
8. Take to teeth and put them on the two opposite sides on the back of the black camera
(pictures 14, 15 , 16 & 17). The teeth can face either way.
9. Take four small gray wheels and snap them on the wheel edges at the base
(pictures 18 & 19)
